What should we improvement

Style
Speed
projection
structure
communion

       
 

The Model and Description of XJY Series Intelligent Meter

This series meters divides into 2-16 lines input signal and 15 kinds of specifications according to polling point.According to imput signal,divide into 3-wire system resistance signal,copule signal,standard voltage and current signal.
XJY
Characteristics
This apparatus applies to the sensor such as temperature, pressure, flow, humidity and liquid level or transmitter and various voltages and current input signal. It can display, control and transmitting for above mentioned parameters(For the XYJ series meter, it can poll display the above parameters).
With linear zing microchip technology, it has higher precision in the range of entire measurement
Can set control value for the upper and lower limit, and this value will not be lost when power failure.
Can set alarm value for the upper and lower limit of each input signal, and this value will not be lost when power failure.
For thermocouple type sensor; it has a automatic temperature compensation in the range of 0-100
It has a sensor broken line protection function
 
Manual or automatic polling
Main Specifications
The voltage of power sourceAC220V10%power consumption3~4WFrequency50Hz
Resolution capacitydivides into 1 and 0.1 or 0.01 according to measurement range.
precision0.5%,0.2%
Input impedanceCurrent signal100Voltage signal100KResistance signalThe current passes through the measure resistance is less than:1mA
Relay output contact capacity3A/220VAC or 5A/24VDCresistance load
4-digit 0.56 or 0.8 inches of LED displayIn the range of -1999~9999, display the measurement value and top and bottom
LED displayFormer four digits nixie tubes display measured value and top and bottom limit alarm set value, two latter digits nixie tubers display the input signals number
Installation methodflush mounting
model
Overall size
Mounting hole
Overall size1608080mm
AH
1608080
152+0.876+0.7
Mounting hole 152+0.876+0.7
AL
8016080
76+0.7152+0.8
 
D
9696112
92+0.792+0.7
F
7272112
67+0.767+0.7
NH
9648112
152+0.876+0.7
NL
4896112
44+0.592+0.7
Input signal
ThermocoupleCalibration numberK0-1300J0-1200E0-1000N0-1300S0-1600B0-1800R0-1600Wre(0-1600)
Thermal resistance signal(3-wire system input): Calibration numberCu50(-50.0+150.0); Cu100(-50.0+150.0); Pt100(-20.0+200.0); Pt100(-200.0+600.0)
Standard signal4-20mA0-10mA1-5V0-10VMill voltthermocouple meterhall transmitter
Input terminal supplies two wire system 4-20mA(DC24V) signal  Input resistance100
Remote pressure signalThree-wire system resistance signal span15~360
AC voltage, current signal500V AC/DC voltmeter
 

 

Add:Sanhe Nanli West,Xing ye St,Daxing District,Beijing P.R.C.
Tel+86 10 69203006 EXT Fax+86 10 60259842    Zip:100076
Web http://www.symore.comE-mail:st48_cn@yahoo.com.cn
Copyright © 1993-2006 Beijing Symore Tech. All rights reserved.